|
 |
Standard Charger
Part Number: 3059
Microprocessor controlled plug-in charger for NiCd/NiMH battery packs
with 1-10 cells (1.2-12 V), charging current 800 mA.Charge control
regardless of charge status, battery capacity and the size of the
battery pack; Prevents overcharge; Trickle charge avoids discharge once
batteries are fully charged; Faulty cell detection identifies defective
battery packs; Worldwide use ( 100 V - 240 V ) due to electronic switch
mode power supply and interchangeable power supply (EU, UK, US, AUS);
Incl. multiple plug-in adaptors.
|
|
Price: £ 36.00 |
|
|
|
| |
 |
Speed Charger
Part Number: 2226
The speed charger can be used with 220 V - 230 V, charging current is 1.5 A. It features an initial checking of the batterypack, recognising of either NiCd or NimH batteries and a trickle charge function after completion of a full charge. Very lightweight, only 290 grms. It reduces all charging times by approx. 50%.
Please note: This charger is equipped with a continental plug only, for british mains outlets an adaptor is needed. Adaptor not included.
|
|
Price: £ 39.95 |
|
|
|
|
| |
 |
Travel Charger 110 - 230V MX6
Part Number: 3019
Microprocessor controlled plug-in charger for NiCd/NiMH battery packs with 1-10 cells (1.2-12 V), charging current 800 mA.
Charge control regardless of charge status, battery capacity and the size of the battery pack; Prevents overcharge; Trickle charge avoids discharge once batteries are fully charged; Faulty cell detection identifies defective battery packs; Worldwide use ( 100 V - 240 V )due to electronic switch mode power supply and interchangeable power supply (EU, UK, US, AUS); Incl. multiple plug-in system.
|
|
Price: £ 39.95 |
|
|
|
|
| |
 |
Multi Charger
Part Number: 3025
Charge Current 1.9 - 3.0 A., depending on torch. Suitable for 110V-240V, available for all models except MX6 and MX6 Pro. Also functions with 24V. Adaptor 24V is not included.
This charger was developed to be used in heavy trucks, hence the 24 V capability. It is very powerful and charges all torches in a very short time. Sturdy aluminium case with separate mains adaptor. When ordering, please state type of torch.
|
|
Price: £ 135.00 |
|
|
|
|
| |
 |
Attachment Ring
Part Number: 2207
A safeguard against loss and damage of your Treble-Light. The small
bolt fits into the 9 mm hole of all Treble-Light handles. A Snappy Coil
can be fastened with the supplied key ring. It swivels freely and
consequently prevents scratches and dents on the lamp.
|
|
Price: £ 4.20 |
|
|
|
|
| |
 |
Snappy Coil
Part Number: 1082
Standard Snappy Coil to secure Diving Lights.
|
|
Price: £ 9.95 |
|
|
|
|
| |
 |
Snappy Coil pro All-Metal
Part Number: 3057
This coiled lanyard expands to 36"! Simply squeeze the side release
buckle and the coil is released offering up to 36" of extension during
use. Fastens to a secure position in seconds. Ideal for use with U/W
lights and photo/video equipment. All connectors and clips non-corrosive
metal.
|
|
Price: £ 25.00 |
|
|
|
|
| |
 |
Safety-Lanyard
Part Number: 3031
Securing line with metal carabiner as an alternative method to fasten and secure your diving light.
|
|
Price: £ 12.50 |
|
|
|
|
| |
 |
Service-Kit
Part Number: 3017
Consists of a brush to clean the threads of diving lights and a special greasing fluid for aluminium threads. Grease for O-Rings also included.
|
|
Price: £ 8.00 |
|
|
|
|
| |
 |
Battery Pack Holder
Part Number: 3020
Provides secure mounting for battery packs on diving tanks (not available for MX 40 Tank). Please state tank size when ordering.
|
|
Price: £ 37.95 |
|
|
|
|
| |
 |
Goodman Handle
Part Number: 3035
Can be used to wear light-heads on the back of a hand. Sturdy aluminium, handle adjustable. Lighthead is not included.
|
|
Price: £ 37.95 |
|
|
|
|
| |
 |
T-Connector
Part Number: 3030
Details
|
|
Price: £ 169.00 |
|
|
|
|
| |
 |
Holder for Lightheads 81mm
Part Number: 3027
Details
|
|
Price: £ 19.00 |
|
|
|
|
